Product Features
CG series electric power monitoring instrument
CG series power monitoring instrument is designed for the power system, industrial and mining enterprises, public facilities, intelligent building power monitoring needs.
Classification:
Key words:
CG series electric power monitoring instrument
Related Annexes:
immediate consultation
Product Description
CG series power monitoring instrument is designed for the power system, industrial and mining enterprises, public facilities, intelligent building power monitoring needs. It can measure all the commonly used power parameters, including current, voltage, frequency, power factor, active power, reactive power, active energy, reactive energy, etc.; with switching input and output, power pulse output and R S485 communication interface, can realize the remote transmission of data. And can be equipped with analog output, harmonic content analysis, complex rate power statistics, event recording and other functions.
The series of products have been widely used in energy management systems, substation automation, distribution network automation, community power monitoring, industrial automation, intelligent buildings, intelligent switchboards and switchboards.
The display magnification, communication address, baud rate, etc. can be set through the buttons on the panel, which is very flexible and convenient to use.
0~20 mA or 4~20 mA analog output.
Alarm output, monitoring the upper and lower limits of the measured parameters.
R S-4 85 digital interface, using standard M O D B U S-R T U protocol.
Switch input, can monitor the system switch status.
Digital calibration zero, digital calibration, high precision, cost-effective.
Technical parameters
Accuracy level | Current and voltage are at level 0.5 or 0.2,active energy is at level 0.5,and reactive energy is at level 1 | ||
display | LED digital display or Chinese LCD liquid crystal display | ||
Input measurement | network | Single phase,three-phase three wire 3P3L,three-phase four wire 3P4L | |
voltage | Rated value | AC220V,AC400V/AC100V(range can be extended through PT) | |
Overload | Continuous:1.2 times Instantaneous:Voltage 2 times(10 seconds) | ||
power dissipation | <1VA(per phase) | ||
impedance | >300kΩ | ||
current | Rated value | AC1A/AC5A(range can be extended through CT,please specify when ordering) | |
Overload | Continuous:1.2 times instantaneous:current 10 times(5 seconds) | ||
power dissipation | <0.4VA(per phase) | ||
impedance | <20MΩ | ||
Frequency | 50/60Hz+10% | ||
Electric energy | Single phase,four quadrant active and reactive energy metering | ||
source | Scope of work | AC220V,AC/DC80-265V,AC380V,DC24V,DC48V | |
Power consumption | ≤5VA | ||
output module | Pulse output | 2-way electrical pulse output,optocoupler relay,constant:5000imp/Kwh(Kvarh) | |
Switching input | 2 or 4 switch inputs | ||
Switching output | 2-way or 4-way switch output | ||
Analog output | 1-4 routes | ||
Communication interface | RS485 interface MODBUS-RTU protocol,optional baud rates of 1200,2400,4800,9600 | ||
Working conditions | Temperature | Working temperature:-10~+55℃,storage temperature:-25~+70℃ | |
Humidity | Relative humidity≤93%RH | ||
altitude | Altitude≤2500m | ||
Isolation and withstand voltage | Input and power supply>2kV,input and output>1kV,power box output>2kV | ||
insulation | ≥100MΩ |
Previous Page
Next Page
Previous Page
Next Page
CGR1000 Series Low Voltage Soft Starter
The CGR1000 series digital soft starter for AC motors can be widely used in loads such as fans, water pumps, conveyors, and compressors.
CGR2000 Series Low Voltage Soft Starter
The CGR2000 series digital AC motor soft starter is a new type of motor starting device with excellent performance.
CGR5100 Series Low Voltage Soft Starter
The CGR5100 series AC motor soft starter is a highly efficient new type of motor starting device.
immediate consultation
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!